Name of the Equipment | Solar Cell I-V Measurement System |
Group | Crystalline Silicon Solar Cells |
Category | litho/analytical |
Operator | |
System Owner | Guru Burkul guruburkul@iitb.ac.in |
| Make / Model | ABET Technologies/Sun 3000 |
| Information | No |
| Serial Number | NA |
| FootPrint | 6 x 4 Feet |
| InstallationDate | 12/06/2013 |
| Equipment Type | Electrical characterization tools |
| Location | NCPRE Char lab (3rd Floor, NanoE Building) |
| AMC | Not Required |
| Local Dealer | Analysys Sciences S K Srinivas, sksrinivas@analysciences.com / Janardan Dhopte, swastik_chrom@hotmail.com, 09821210133 |
| Actual Dealer | ABET Technologies Allen Smith, asmith@abet-technologies.com / Zbigniew Drozdowicz, zb@abet-technologies.com |
| SOP | SOP/69_SOP.pdf |
| Training & other policy documents | POLICY/69_POLICY.pdf |
| Recipies | |
| Glimpse | GLIMPSE/69_GLIMPSE.pdf |
| Tool Facilities Requirements | Chiller |
| Access | Open |
| Lab Phone No | 3585 |
| Substrate allowed | All types of solar cells |
| Substrate Dimension | 1 inch to 6 inch |
| Chemical allowed | Only IPA for cleaning and removing dust/ greese, All types of solar cells and I-V of devices to be characterized under 1 Sun irradiation |
| Precursors/ Targets available *Based on stock availability | NA |
| Precursor/ Target loaded inside tool | 4 |
| Target dimension | NA |
| Gases allowed | Nitrogen gas for purging and drying the sample and measurement substrate to remove dust particles an |
| Contamination remarks | The Thermochuck and the flip chuck must be clean before and after the measurements. The probes must be used with caution of breakage. |